Building permits in 91331

PROPOSE (N) 30'-6"X40' TWO STORY BUILDING: CONSIST OF 1ST FLOOR ACCESSORY DWELLING UNIT WITH COVERED ENTRY (PER LAMC12.22A.33(c) and (e)) AND 2ND FLOOR SFD SB9 (PER per SB9 Two-Unit Development Ca Govt Code 65852.21) WITH EXTERIOR STAIR AND COVERED BALCONY_ BUILDING SHALL BE FULLY SPRINKLER THROUGHOUT WITH NFPA 13D.

NEW 2 STORY SFD WITH ATTACHED GARAGE (PARCEL A)

NEW 2 STORY SFD WITH ATTACHED GARAGE (PARCEL C)

NEW 2 STORY ACCESSORY DWELLING UNIT (PARCEL A)

NEW 2 STORY ACCESSORY DWELLING UNIT (PARCEL C)

Tenant improvement; change of use from retail to self-service laundry. Maintain site and structure for footprint, structural walls (and/or elements). Provide non-structural interior partitions and ceiling construction.

NEW IRR SHAPED ONE STORY ADDITION (603 SF) TO (E) SINGLE FAMILY DWELLING & REMODEL, CONVERT (E) ATT GARAGE TO JUNIOR ACCESSORY DWELLING UNIT (360SF), & ADD (N) 2ND FLOOR ACCESSORY DWELLING UNIT (360 SF)

CONVERT PORTION OF ATT GARAGE TO ACCESSSORY DWELLING UNIT PER GC 66323(a)(1) AND REMAINING PORTION TO LAUNDRY ROOM FOR THE SFD.

ePlan. Conversion and Addition of Existing Detached Garage into an ADU. Work Per Engineered Design.

eplan CONVERT (E) DETACHED GARAGE TO AN ADU WITH ADDITION PER LAMC 12.22 A.33(b)(1)

INSTALL CONCRETE PAD AND PIPE SUPPORT FOR TANK AND EQUIPTMENT.

CONVERT EX ATTACHED GARAGE INTO ACCESSORY DWELLING UNIT PER GCS 66323(a)(1). ALL WORK PER WFPP.

Supplenmental to permit 17016-20000-33881 to add 9 openings in the interior shearwalls for mechanical ventilations and add framing to cover hallway. All work per engineer design.

CONVERT (E) DETACHED RECREATION ROOM & STORAGE TO ACCESSORY DWELLING UNIT PER GCS 66323(a)(1).

EPLAN CHANGE OF USE FROM (E) PRODUCE MARKET TO ADULT DAY CARE FACILITY AND ADD.

EPLAN-REBUILT EXISTING GARAGE AND CONVERT TO STOARAGE, NEW CARPORT AND NEW ADDITION OF 1/2 BATHROOM. ALL WORK PER ENGINEERING

Re-roof with Class A or B roof covering material weighing less than 6 pounds per sq. ft. over new solid sheathing (40 ) Squares. Class A roof covering is required within Very High Fire Hazard Severity Zone (VHFHSZ). For residential roof replacement > 50% of the total roof area, apply Cool Roof Product labeled and certified by Cool Roofing Rating Council (CRRC). Cool Roof may be required for non-residential buildings per Title 24, Part 6, Section 141.0(b)2B.

Re-roof with Class A or B roof covering material weighing less than 6 pounds per sq. ft. over existing solid sheathing __17__Squares. Class A roof covering is required within Very High Fire Hazard Severity Zone (VHFHSZ). For residential roof replacement > 50% of the total roof area, apply Cool Roof Product labeled and certified by Cool Roof Rating Council (CRRC). Cool Roof may be required for non-residential buildings per Title 24, Part 6, Section 141.0(b)2B.

Re-roof with Class A or B roof covering material weighing less than 6 pounds per sq. ft. over existing solid sheathing 60 Squares. Class A roof covering is required within Very High Fire Hazard Severity Zone (VHFHSZ). For residential roof replacement > 50% of the total roof area, apply Cool Roof Product labeled and certified by Cool Roof Rating Council (CRRC). Cool Roof may be required for non-residential buildings per Title 24, Part 6, Section 141.0(b)2B.

Re-roof with Class A or B roof covering material weighing less than 6 pounds per sq. ft. over new solid sheathing 28 Squares. Class A roof covering is required within Very High Fire Hazard Severity Zone (VHFHSZ). For residential roof replacement > 50% of the total roof area, apply Cool Roof Product labeled and certified by Cool Roof Rating Council (CRRC). Cool Roof may be required for non-residential buildings per Title 24, Part 6, Section 141.0(b)2B.