Building permits in 91325

Tenant Improvement of approximately 12,500 sq ft workspace in an existing 1-story facility.Scope of work shall include partial demolition of existing power, and HVAC system. Construction of a new door, new flooring and finishes, new power, lighting, and HVAC systems within the area of work. No change in existing buildings exterior skin, existing building height, existing building area, existing building exit access, occupancy or use group classification.

Application of an approved coating to an existing roof.

Complete work done under previously expired permit #23010-20000-00647. _90_% completed as determined by inspection.

EPLAN: (P) KITCHEN AND LAUNDRY REMODEL & (N) BATHROOM TO EXISTING SINGLE FAMILY DWELLING

EPLAN: Exterior enhancement to replace stucco and add thin adhered brick veneer to existing commercial building.

PROPOSED NEW DETACHED CANTILEVERED STEEL TRELLIS.

Re-roof with Class A or B roof covering material weighing less than 6 pounds per sq. ft. over existing solid sheathing 60 Squares. Class A roof covering is required within Very High Fire Hazard Severity Zone (VHFHSZ). For residential roof replacement > 50% of the total roof area, apply Cool Roof Product labeled and certified by Cool Roof Rating Council (CRRC). Cool Roof may be required for non-residential buildings per Title 24, Part 6, Section 141.0(b)2B.

Re-roof with Class A or B material weighing less than 6 pounds per sq. ft. over existing solid sheathing___15___Squares. Class A roof covering is required within Very High Fire Hazard SeverityZone(VHFHSZ).For residential roof replacement>50% of the total roof area, apply Cool Roof Product labeled andcertified byCool Roof Rating Council (CRRC). Cool Roof may be required for non-residential buildings per Title24, Part6, Section 141(b) 2B.

supplemental permit to 24010-10000-05193 to add Exterior Staircase for second story storage

Re-roof with Class A or B roof covering material weighing less than 6 pounds per sq. ft. over new solid sheathing 30 Squares. Class A roof covering is required within Very High Fire Hazard Severity Zone (VHFHSZ). For residential roof replacement > 50% of the total roof area, apply Cool Roof Product labeled and certified by Cool Roof Rating Council (CRRC). Cool Roof may be required for non-residential buildings per Title 24, Part 6, Section 141.0(b)2B.

Re-roof with Class A or B material weighing less than 6 pounds per sq. ft. over existing solid sheathing___17___Squares. Class A roof covering is required within Very High Fire Hazard SeverityZone(VHFHSZ). For residential roof replacement>50% of the total roof area, apply Cool Roof Product labeled and certified by Cool Roof Rating Council (CRRC). Cool Roof may be required for non-residential buildings per Title 24, Part 6, Section 141(b) 2B. INVESTIGATION CE FEE ADDED "COMPLY WITH DEPARTMENT ORDER effective date08/07/2026. PERMIT WILL EXPIRE 30 DAYS FROM ISSUANCE DATE".

Complete work done under previously expired permit #19010-20000-02866 Work is 95% complete(minimum 75% completed as determined by inspection).

Re-roof with Class A or B roof covering material weighing less than 6 pounds per sq. ft. over existing solid sheathing 30 Squares. Class A roof covering is required within Very High Fire Hazard Severity Zone (VHFHSZ). For residential roof replacement > 50% of the total roof area, apply Cool Roof Product labeled and certified by Cool Roof Rating Council (CRRC). Cool Roof may be required for non-residential buildings per Title 24, Part 6, Section 141.0(b)2B.

Re-roof with Class A or B roof covering material weighing less than 6 pounds per sq. ft. over existing solid sheathing 27 Squares. Class A roof covering is required within Very High Fire Hazard Severity Zone (VHFHSZ). For residential roof replacement > 50% of the total roof area, apply Cool Roof Product labeled and certified by Cool Roof Rating Council (CRRC). Cool Roof may be required for non-residential buildings per Title 24, Part 6, Section 141.0(b)2B.

Re-roof with Class A or B roof covering material weighing less than 6 pounds per sq. ft. over existing solid sheathing 26 Squares. Class A roof covering is required within Very High Fire Hazard Severity Zone (VHFHSZ). For residential roof replacement > 50% of the total roof area, apply Cool Roof Product labeled and certified by Cool Roof Rating Council (CRRC). Cool Roof may be required for non-residential buildings per Title 24, Part 6, Section 141.0(b)2B.

Re-roof with Class A or B roof covering material weighing less than 6 pounds per sq. ft. over existing solid sheathing 25 Squares. Class A roof covering is required within Very High Fire Hazard Severity Zone (VHFHSZ). For residential roof replacement > 50% of the total roof area, apply Cool Roof Product labeled and certified by Cool Roof Rating Council (CRRC). Cool Roof may be required for non-residential buildings per Title 24, Part 6, Section 141.0(b)2B.

INTERIOR REMODEL TO SFD. CONVERT DINING ROOM TO NEW BEDROOM.

Re-roof with Class A or B roof covering material weighing less than 6 pounds per sq. ft. over existing solid sheathing 25 Squares. Class A roof covering is required within Very High Fire Hazard Severity Zone (VHFHSZ). For residential roof replacement > 50% of the total roof area, apply Cool Roof Product labeled and certified by Cool Roof Rating Council (CRRC). Cool Roof may be required for non-residential buildings per Title 24, Part 6, Section 141.0(b)2B.

Re-roof with Class A or B roof covering material weighing less than 6 pounds per sq. ft. over existing solid sheathing 22 Squares. Class A roof covering is required within Very High Fire Hazard Severity Zone (VHFHSZ). For residential roof replacement > 50% of the total roof area, apply Cool Roof Product labeled and certified by Cool Roof Rating Council (CRRC). Cool Roof may be required for non-residential buildings per Title 24, Part 6, Section 141.0(b)2B.

SUPPLEMENTAL PERMIT TO 25010-20000-04963 TO REVISE THE TITLE 24 ANALYSIS