Building permits in 90230

EPLAN CORE AND SHELL RENOVATION OF AN EXISTING, (1) STORY BUILDING; SCOPE OF WORK INCLUDES:CHANGE OF USE FROM S1 OCCUPANCY - MOTORCYCLE REPAIR FACILITY TO B OCCUPANCY -OFFICE. The new office tenant shall apply for a TI for the space. NEW KITCHENETTE, NEW RESTROOM, NEW ROOFING ONLY

Eplan - New Detached ADU Per LAMC 12.22 A.33

ePlan. New Swimming pool

Re-roof with Class A or B material weighing less than 6 pounds per sq. ft. over existing solid sheathing_22_Squares. Class A roof covering is required within Very High Fire Hazard Severity Zone(VHFHSZ). For residential roof replacement > 50% of the total roof area, apply Cool Roof Productlabeled and certified by Cool Roof Rating Council (CRRC). Cool Roof may be required fornon-residential buildings per Title 24, Part 6, Section 149(b).

Concrete block freestanding masonry fence walls constructed per Information Bulletin P/BC 2020-096 located in residential zones, maximum 6 feet height above grade, and not located in the required front yard or within 5 feet of the side street lot line of a reverse corner lot (subject to additional limitations of LAMC Section 12.22C20(f) and Information bulletin P/ZC 2002-002).

3 window(s). Window and door change-out (same size & type) for residential buildings. Dual glazing, labeled and certified by National Fenestration Rating Council (NFRC), is required for doors and windows replaced in all residential buildings, three stories or less, per Title 24, Part 6, Section 150.2(b)1B.Fiber Cement siding over solid sheathing with an approved water-resistive barrier per valid ICC Evaluation Report # ICC-ES ESR-3923 on exterior walls at 5 feet or more from property lines for residential buildings. (Applicant to provide a copy of the report to inspector).

ePlanInterior alteration to the (E) SFD to add a new powder room.

Re-roof with Class A or B roof covering material weighing less than 6 pounds per sq. ft. over new solid sheathing 16 Squares. Class A roof covering is required within Very High Fire Hazard Severity Zone (VHFHSZ). For residential roof replacement > 50% of the total roof area, apply Cool Roof Product labeled and certified by Cool Roof Rating Council (CRRC). Cool Roof may be required for non-residential buildings per Title 24, Part 6, Section 141.0(b)2B.

Re-roof with Class A or B roof covering material weighing less than 6 pounds per sq. ft. over existing solid sheathing 17 Squares. Class A roof covering is required within Very High Fire Hazard Severity Zone (VHFHSZ). For residential roof replacement > 50% of the total roof area, apply Cool Roof Product labeled and certified by Cool Roof Rating Council (CRRC). Cool Roof may be required for non-residential buildings per Title 24, Part 6, Section 141.0(b)2B.

Re-roof with Class A or B roof covering material weighing less than 6 pounds per sq. ft. over new solid sheathing 5 Squares. Class A roof covering is required within Very High Fire Hazard Severity Zone (VHFHSZ). For residential roof replacement > 50% of the total roof area, apply Cool Roof Product labeled and certified by Cool Roof Rating Council (CRRC). Cool Roof may be required for non-residential buildings per Title 24, Part 6, Section 141.0(b)2B.

Re-stucco for residential buildings. Area = 400 sqft.

2 door(s). Window and door change-out (same size & type) for residential buildings. Dual glazing, labeled and certified by National Fenestration Rating Council (NFRC), is required for doors and windows replaced in all residential buildings, three stories or less, per Title 24, Part 6, Section 150.2(b)1B.

Supplemental to 24010-10000-04022 to change the engineer of record and capture design changes to the plans.

Installation of a roof-mounted Microinverter/AC module solar photovoltaic (PV) system, not exceeding 38.4kW in a 1 or 2 family dwelling.

[E-PLAN] Roof-mounted solar PV system.System size: 9kW DC, 11.5kW AC(20) 450W modules(1) 11.5 kW AC hybrid ESS(1) 200A energy management panel(1) 225A backup loads panelNote to plan check engineer: Please note SLD module count discrepancy from rest of plans*** Applicant work description below: *** New Rooftop Solar Installation 9 KW, (20) Modules, (1) Hybrid Battery

Supplemental to permit # 26041-30000-28619 to add: 12 existing branch circuits, which include lights, switches, and outlets, all circuits are 120V. Also ad 3 smoke detectors.

Supplemental to permit # 26041-30000-28640 to add: 20 existing branch circuits, which includes lights, switches, and outlets. All circuits are 120V. add 2 smoke detectors( Per Inspectors Corrections)

Installation of Cable Elevator

REVISION TO PREVIOUSLY APPROVED PLAN UNDER 25042-10000-11263. REVISED FROM ALL ELECTRIC TO GAS. INSTALLATION OF LOW PRESSURE GAS SYSTEM. REVISED WASTE/VENT RISER DIAGRAM.

Install an electrical vehicle charger(s) in a single-family dwelling.