Building permits in 90047

ePlan: 869S.F Addition to an (E) 3 Car Garage and conversion to a 2 Detached Accessory Dwelling units per Per GCS66323(A)(4)

EPLAN: Convert (E) One Story Detached Garage to ADU.Per State or City Ordinance. All work per WFPP"COMPLY WITH DEPARTMENT ORDER effective date 01/30/2026. PERMIT WILL EXPIRE 30 DAYS FROM ISSUANCE DATE"

REMODEL (E) SINGLE FAMILY DWELLING TO REMODEL (E) BATHROOM AND KITCHEN AND ENLARGE (E) BATHROOM

Eplan. AT&T Modification to existing wireless facility to remove and replace antenna and ancillary equipment.

SUPPLEMENTAL TO #25014-10000-05217 TO CHANGE FROM ADU CONVERSION/ALTERATION TO NEW BUILDING ADU. NEW WORK DESCRIPTION TO BE: "NEW DETACHED ADU PER STATE LAW"

23 window(s). Window and door change-out (same size & type) for residential buildings. Dual glazing, labeled and certified by National Fenestration Rating Council (NFRC), is required for doors and windows replaced in all residential buildings, three stories or less, per Title 24, Part 6, Section 150.2(b)1B.1 bathroom(s).Bathroom remodel for residential buildings (no structural changes).Kitchen remodel for residential buildings (no structural changes).

** SUPPLEMENTAL TO22010-10000-05112 TO CAPTURE WATER CURTAIN IN LIEU OF PROTECTED EXTERIOR OPENINGS.We would like to request using a water curtain instead of a protected exterior openings

Kitchen and two bathroom remodel for residential buildings, including mechanical, plumbing and electrical. (no structural changes)."Comply with department order. Permit to expire 30 days from issuance date."

Re-roof with Class A or B roof covering material weighing less than 6 pounds per sq. ft. over existing solidsheathing ___20___Squares. Class A roof covering is required within Very High Fire Hazard Severity Zone(VHFHSZ). For residential roof replacement > 50% of the total roof area, apply Cool Roof Product labeledand certified by Cool Roof Rating Council (CRRC). Cool Roof may be required for non-residential buildingsper Title 24, Part 6, Section 141.0(b)2B

eplanSUPPLEMENTAL TO: 25016-10000-34716 FOR (N) ROOF TRUSS DESIGN FOR (E) SFD AND ADDITION.

Re-roof with Class A or B roof covering material weighing less than 6 pounds per sq. ft. over new solid sheathing 18 Squares. Class A roof covering is required within Very High Fire Hazard Severity Zone (VHFHSZ). For residential roof replacement > 50% of the total roof area, apply Cool Roof Product labeled and certified by Cool Roof Rating Council (CRRC). Cool Roof may be required for non-residential buildings per Title 24, Part 6, Section 141.0(b)2B.

Re-roof with Class A or B roof covering material weighing less than 6 pounds per sq. ft.over existing solid sheathing _21_Squares. Class A roof covering is required withinVery High Fire Hazard Severity Zone (VHFHSZ). For residential roof replacement >50% of the total roof area, apply Cool Roof Product labeled and certified by Cool RoofRating Council (CRRC). Cool Roof may be required for non-residential buildings perTitle 24, Part 6, Section 141.0(b)2B. (main house and garage)

Re-roof with Class A or B roof covering material weighing less than 6 pounds per sq. ft. over existing solid sheathing 22 Squares. Class A roof covering is required within Very High Fire Hazard Severity Zone (VHFHSZ). For residential roof replacement > 50% of the total roof area, apply Cool Roof Product labeled and certified by Cool Roof Rating Council (CRRC). Cool Roof may be required for non-residential buildings per Title 24, Part 6, Section 141.0(b)2B.

Re-roof with Class A or B roof covering material weighing less than 6 pounds per sq. ft. over existing solid sheathing 22 Squares. Class A roof covering is required within Very High Fire Hazard Severity Zone (VHFHSZ). For residential roof replacement > 50% of the total roof area, apply Cool Roof Product labeled and certified by Cool Roof Rating Council (CRRC). Cool Roof may be required for non-residential buildings per Title 24, Part 6, Section 141.0(b)2B.

Re-roof with Class A or B roof covering material weighing less than 6 pounds per sq. ft. over existing solid sheathing 22 Squares. Class A roof covering is required within Very High Fire Hazard Severity Zone (VHFHSZ). For residential roof replacement > 50% of the total roof area, apply Cool Roof Product labeled and certified by Cool Roof Rating Council (CRRC). Cool Roof may be required for non-residential buildings per Title 24, Part 6, Section 141.0(b)2B.

Re-roof with Class A or B roof covering material weighing less than 6 pounds per sq. ft. over existing solid sheathing 20 Squares. Class A roof covering is required within Very High Fire Hazard Severity Zone (VHFHSZ). For residential roof replacement > 50% of the total roof area, apply Cool Roof Product labeled and certified by Cool Roof Rating Council (CRRC). Cool Roof may be required for non-residential buildings per Title 24, Part 6, Section 141.0(b)2B.

Install radiant barrier and/or insulation in attic for residential buildings.

Re-roof with Class A or B roof covering material weighing less than 6 pounds per sq. ft. over existing solid sheathing 18 Squares. Class A roof covering is required within Very High Fire Hazard Severity Zone (VHFHSZ). For residential roof replacement > 50% of the total roof area, apply Cool Roof Product labeled and certified by Cool Roof Rating Council (CRRC). Cool Roof may be required for non-residential buildings per Title 24, Part 6, Section 141.0(b)2B.

Add sill plate anchor bolts and plywood to cripple walls (if existing) per LA City Standard Plan #1; no foundation replacement (Earthquake hazard reduction per Chapter 92 of the Los Angeles Building Code). (Houses, residential buildings up to 3 stories and up to 4 units).

SUPPLEMENTAL TO 26016-10000-23622 TO REVISE BATHROOM FLOOR PLAN.