Building permits in 90035

ADDITION AND REMODEL TO (E) TWO-STORY SINGLE FAMILY DWELLING.

Eplan - REMODEL SINGLE-FAMILY DWELLING TO CREATE EXTERIOR DOOR, STAIRS AT SIDE AND NEW STEPS AT REAR.

EPLAN: CONVERT DETACHED ADU/STORAGE TO SINGLE FAMILY DWELLING PER SB9 UNIT AND CONVERT (E) 1ST FLOOR STORAGE TO ATTACHED ACCESSORY DWELING UNIT PER LAMC 12.22.A.33(c) and(e), . AND 119S.F 1ST FLOOR STORAGE ADDITION."COMPLY WITH DEPARTMENT ORDER effective date 09/26/2024. PERMIT WILL EXPIRE 30 DAYS FROM ISSUANCE DATE". All permits shall be for the same time period limitation.

Re-roof with Class A or B roof covering material weighing less than 6 pounds per sq. ft. over existing solid sheathing ( 14 ) Squares. Class A roof covering is required within Very High Fire Hazard Severity Zone (VHFHSZ). For residential roof replacement > 50% of the total roof area, apply Cool Roof Product labeled and certified by Cool Roofing Rating Council (CRRC). Cool Roof may be required for non-residential buildings per Title 24, Part 6, Section 141.0(b)2B.

CONVERT ATTACHED GARAGE TO ACCESSORY DWELLING UNIT PER LAMC 12.22 A.33(c) and (e)

NEW SWIMMING POOL AND SPA WITH BAJA PER STANDARD PLAN 268.

Re-roof with Class A or B roof covering material weighing less than 6 pounds per sq. ft. over existing solid sheathing ___32___Squares. Class A roof covering is required within Very High Fire Hazard Severity Zone (VHFHSZ). For residential roof replacement > 50% of the total roof area, apply Cool Roof Product labeled and certified by Cool Roof Rating Council (CRRC). Cool Roof may be required for non-residential buildings per Title 24, Part 6, Section 141.0(b)2B

Kitchen/bathroom (1 ) remodel for residential buildings (no structural changes).

Add sill plate anchor bolts and plywood to cripple walls (if existing) per LA City Standard Plan #1; no foundation replacement (Earthquake hazard reduction per Chapter 92 of the Los Angeles Building Code). (Houses, residential buildings up to 3 stories and up to 4 units).

ePlan. Remodel of Existing Single Family Dwelling w/ 15 SF Addition (Enclosing (e) Covered Area andremoval of 256 SF Patio Cover . "COMPLY WITH DEPARTMENT ORDER effective date 06/26/2026. PERMIT WILL EXPIRE 30 DAYS FROM ISSUANCE DATE"

Install radiant barrier and/or insulation in attic for residential buildings. Includes Detached Garage Re-roof with Class A or B roof covering material weighing less than 6 pounds per sq. ft. over existing solid sheathing __32__Squares. Class A roof covering is required within Very High Fire Hazard Severity Zone (VHFHSZ). For residential roof replacement > 50% of the total roof area, apply Cool Roof Product labeled and certified by Cool Roof Rating Council (CRRC). Cool Roof may be required for non-residential buildings per Title 24, Part 6, Section 141.0(b)2B. INCLUDES DETACHED GARAGE

Re-roof with Class A or B material weighing less than 6 pounds per sq. ft. over existing solid sheathing __29____Squares. Class A roof covering is required within Very High Fire Hazard Severity Zone (VHFHSZ). For residential roof replacement > 50% of the total roof area, apply Cool Roof Product labeled and certified by Cool Roof Rating Council (CRRC). Cool Roof may be required for non-residential buildings per Title 24, Part 6, Section 141.0(b) 2B.

Re-roof with Class A or B roof covering material weighing less than 6 pounds per sq. ft. over existing solid sheathing 25 Squares. Class A roof covering is required within Very High Fire Hazard Severity Zone (VHFHSZ). For residential roof replacement > 50% of the total roof area, apply Cool Roof Product labeled and certified by Cool Roof Rating Council (CRRC). Cool Roof may be required for non-residential buildings per Title 24, Part 6, Section 141.0(b)2B.

Re-roof with Class A or B roof covering material weighing less than 6 pounds per sq. ft. over existing solid sheathing 20 Squares. Class A roof covering is required within Very High Fire Hazard Severity Zone (VHFHSZ). For residential roof replacement > 50% of the total roof area, apply Cool Roof Product labeled and certified by Cool Roof Rating Council (CRRC). Cool Roof may be required for non-residential buildings per Title 24, Part 6, Section 141.0(b)2B.

SUPPLEMENTAL PERMIT TO 22016-20000-02309 TO REVISE BATHROOM LAYOUT ON 1ST FLOOR ONLY ALL WORK PER ENGINEERING

Water damage, termite damage/ dry rot repair less than 10% of replacement cost of residential buildings.Fire damage repair for residential buildings only (maximum 10% of replacement cost of building).Application of an approved coating to an existing exterior balcony or deck.Wet Sandblasting (permit is required only in Fire District 1).

(1) Bathroom remodel for residential buildings (no structural changes)

Re-roof with Class A or B roof covering material weighing less than 6 pounds per sq. ft. over existing solid sheathing 8 Squares. Class A roof covering is required within Very High Fire Hazard Severity Zone (VHFHSZ). For residential roof replacement > 50% of the total roof area, apply Cool Roof Product labeled and certified by Cool Roof Rating Council (CRRC). Cool Roof may be required for non-residential buildings per Title 24, Part 6, Section 141.0(b)2B.

Windows (2) change-out (same size & type) for residential buildings. Dual glazing, labeled and certified by National Fenestration Rating Council (NFRC), is required for doors and windows replaced in all residential buildings, three stories or less, per Section 150.2(b) 1B of Title 24.

Re-roof with Class A or B roof covering material weighing less than 6 pounds per sq. ft. over existing solid sheathing 4 Squares. Class A roof covering is required within Very High Fire Hazard Severity Zone (VHFHSZ). For residential roof replacement > 50% of the total roof area, apply Cool Roof Product labeled and certified by Cool Roof Rating Council (CRRC). Cool Roof may be required for non-residential buildings per Title 24, Part 6, Section 141.0(b)2B.